Chest heated ironer
An unique lever device is introduced on the cylinder of the chest ironer to create pressure, which ensures the working rolls and chests to keep balanced pressure for high quality ironing . The lever device has positions for pause, repair and inspection.
The connecting plate can be heated by whirly steam system , because the holes are underneath of it so that the steam with high speed enable the whirpool to cover all the surface of the connecting plate . The speed and quality of chest heated ironing machine are increased markedly , because the flatworks are ironed through the hot surface of the arc connecting plate.
A safe clag plate is installed to keep fingers away for security purpose. The high speed ironing machine can shut down immediately if the plate is pushed.
Pressure controlling system for steam and compressed air is installed on the chest ironer so as to ensure the machine running in normal condition. It alarms as soon as the pressure is too low.
There are four emergency buttons at each corner of the chest heated flatwork ironer. The chest ironer machine stops running immediately if one of the buttons is pressed.
The rolls can be lifted up and locked onto the machine in case of sudden power cut-off.
Thanks to the unique design of heat recycling system, steam in the chest can run smoothly and sufficiently so that the heat can be fully used, and the outside of the chests has insulation layer to avoid heat waste.
Main data of the chest heated ironer
Max. ironing width
Diameter of roll
Number of chest
Compressed air pressure
Power of driving motor
Power of dehumidifying fan
Diameter of air exhaust pipe
Compressed air pipe diameter
Steam pipe diameter
Condensate pipe dia.